Jetzt gratis Bosch Starterset sichern! » Jetzt gratis Bosch Starterset sichern! »

Intel NUC8I5INHJA (Intel Core i5-8265U, 8GB RAM, 16GB Optane SSD, 1TB 2,5" HDD, Radeon 540X, Win 10 Home)

212,93 €
inkl. MwSt.
zzgl.
Lieferzeit: 2-3 Tage
auf Lager
Verkauf & Versand:
MiniPC_de
(4.47)
Intel NUC8I5INHJA (Intel Core i5-8265U, 8GB RAM, 16GB Optane SSD, 1TB 2,5" HDD, Radeon 540X, Win 10 Home)
212,93 €
inkl. MwSt.
zzgl.

Produktbeschreibung

Überblick

NUC 8 Home Kit !
Radeon™ 540X !
Win 10 64-bit !

Beschreibung

Windows 10 Home (Mehrsprachig)

  • CPU: Intel Core i5-8265U, bis zu 4x 3,9GHz, 6MB Cache, 25W TDP
  • RAM: 8GB LPDDR3 SDRAM vorinstalliert (nicht erweiterbar)
  • Festplatte: 1x SATA 6Gb/​s 2,5" Support (1 TB 2,5" HDD vorinstalliert)
  • SSD: 1x M.2/​M-Key (PCIe 3.0 x4/​SATA, 2280/​2242) (16GB M.2 PCIe Intel Optane vorinstalliert)
  • Grafik: AMD Radeon 540X, 1x HDMI 2.0b, 1x Mini DP
  • Weitere Anschlüsse: 1x USB-C 3.1, 3x USB-A 3.1, 1x Gb LAN (Intel I219-V), 1x Klinke (Realtek ALC256), 1x Hohlbuchse (Netzanschluss)
  • Wireless WLAN 802.11a, 802.11b/g/n, 802.11ac, Bluetooth 5.0
  • Audio 7.1 (Intel HD Audio)
  • Netzteil: 90W, extern
  • VESA-Halterung: 75x75/​100x100 (inkludiert)
  • Abmessungen (BxHxT): 117x51x112mm
  • Besonderheiten: Nettop, Sicherheitsschloss (Kensington), Infrarot-Sensor

Eigenschaften

Intel NUC BXNUC8I5INHJA2. Prozessor-Taktfrequenz: 1,6 GHz, Prozessorfamilie: Intel® Core™ i5 der achten Generation, Prozessor: i5-8265U. RAM-Speicher: 8 GB, Interner Speichertyp: LPDDR3-SDRAM. Gesamtspeicherkapazität: 1000 GB, Speichermedien: Festplatte. On-Board Grafikadaptermodell: Intel® UHD Graphics, Dediziertes Grafikadaptermodell: AMD Radeon 540X. Installiertes Betriebssystem: Windows 10 Home, Betriebssystemsarchitektur: 64-Bit. Stromversorgung: 90 W. Gehäusetyp: UCFF. Produkttyp: Mini-PC. Produktfarbe: Schwarz

Hinweise

Intel NUC8 with Windows
On Intel NUC8 systems with pre-installed Windows, the license key is stored in the firmware/BIOS. You can reinstall Windows 10 or Windows 11 at any time using Microsoft installation media. Activation is straightforward. If the hard drive is not recognized during installation, first set the SATA mode in the BIOS to AHCI. Then boot from the Windows installation media and delete all partitions on the hard drive. After that, switch from AHCI to Intel RST in the BIOS and you can then install Windows normally.


Produktdaten

Bewertungen

{{#if results}}
{{/if}}